logo

Order before 12pm for 48 Hour Dispatch

  • The cart is empty

0

Tealwash 12

£0.00 Inc. VAT£0.00 Excl. VAT

Tealwash 12

SKU: TEALWASH12

    • Installation at our Bristol Installation Centre only
    • Bowl, tank & lid are double skinned in high impact resistant polyethylene
    • Fully automatic operation
    • Heater operates when engine is running and battery fully charged
    • Fast heating, 2-3 hot washes in 10 minutes
    • 43/46ºC ideal water temperature
    • Fully opening lid for fast filling
    • Soap & towel dispensers available
    • 5 litre capacity/20 hand washes
Paypal buy now pay later

Product Page - Request a Call Back form popup

Product Page - Request a Call Back form popup

Tealwash 12


The robust and easy to clean Tealwash 12 portable sinks are the perfect solutions for motor vehicles.

Wherever your motor vehicle goes, your hot water hand washing facilities can go too!

The Tealwash provides more than twenty, twelve second washes, from each filling of the 5 litre water tank. And it’s easy to fill and empty with a large opening lid for a quick top-up with clean water. Close the bowl after washing and the waste water drains away.

Fingertip tap operation achieves real hand hygiene by providing hot running water at the constant temperature of 38-43ºC.

Simply place a suitable container underneath the blue outlet pipe on the Tealwash to collect the waste water during hand washing.

Teal vehicle units incorporate 3 wire technology. Standard battery positive – red wire, earth wire – black. Connect the white wire to the ignition control fuse.

 

Tealwash is designed for use on commercial vehicles including –

    • Service vans
    • Waste lorries
    • Emergency response vehicles
    • Catering vans

Well located mounted holes help to position the unit in the right place, outside or inside the vehicles. Connect two 4mm wires directly to the battery using the fuse holder supplied (12 volt, 30 amp fuse and 24 volt, 20 amp fuse) and the red telltale light shows that you are ready to go.

The battery state remains quiescent at 12 volts when the vehicle is turned off. When switched on the alternator will raise the battery output to 14-14.5 volt. The software in the Tealwash will detect this rise and switch on the unit when it detects 13.8 volts. The unit will work continuously until the vehicle is switched off, and it will observe the battery output dropping back to 12 volts, cutting out the 12.8 volts. The battery will not be therefore by drained.

View our range of Handwash Systems.

There are no reviews yet.

Be the first to review “Tealwash 12”



Newsletter
Want to get offers and discounts in your email box? Sign up and subscribe to our newsletters and get all the benefits Vehicle Accessories can offer.